Download and Installation Instructions

• Download the Unit Firmware and save to a known location.
• Download the Management Application (Windows or Linux) and save to a known location.
• Unzip (Windows) and run the Management Application installer, or install one of the Linux packages.
• To install the unit firmware, open the Axtrinet Control Application, and select TOOLS then UPGRADE UNIT.
• Select the relevant unit and unit firmware file (.bin) and then DOWNLOAD to start the upgrade process.
• The download progress window appears while the file is downloaded to the unit, and takes 2-3 minutes.
• If successful, the “Download Complete” message is displayed, and the unit reboots.
• The PWR LED flashes amber while the new image is processed and saved into unit memory, and takes 3-4 minutes.
• The unit then boots normally
  If you have any questions or issues, please contact Support

Enhancements

• QSFP+ ports can be configured as 40Gbps or 4x10Gbps
• Multi-Burst Transmit Mode
• Packet per Second Transmit Rate
• Optional Port ID, packet sequence number, transmit and receive timestamps (to ±8ns resolution) for latency and jitter measurements.
• Up to 1GB ‘deep’ buffer available for line-rate packet capture at 10Gbps and 40Gbps
• Save captured data to PCAP file for analysis in Wireshark.
• TCL API for Linux and Windows
  Updated User Guide and Quick Start Guide, new TCL User Guide and Header Definitions